Hughes AN6-098P Manuale Utente

 

The radio assembly mounts onto the feed support tube (Figure 5). 
The feed rods (Figure 6) attach to the reflector and support the 
feed support tube.

Each of the two antenna kits contains one feed support tube and 
two feed rods, for the radio type supported by the specific antenna 
kit. Figure 5 shows both types of feed support tubes for the two 
radio types. The feed support tube for the cradle-type radio is 
stamped TG. Other letters or numbers may appear with TG.   

Figure 6 shows the two types of feed rods for the two radio types. 
The rods in the two antenna kits (for each radio type) are different 
lengths and are not interchangeable. The feed rods for the 
cradle-type radio are stamped TG. Other letters or numbers may 
appear with TG. 

Figure 5:  Feed support tubes (two types)

Tube for 

J-type radio

Tube for 

cradle-type radio

6 holes along 

mounting surface; 

5 pass through tube

4 ho

les a

long

 

radio

 mou

nting

 surf

ace

Figure 6:  Feed rods (two types)

28.5 inc

hes ove

rall leng

th

Rods for 

J-type radio

Rods for 

cradle-type radio

30.5 inch

es overa

ll length