Hughes AN6-098P Manuale Utente

 

Complete the following steps before leaving the installation site.

Remove the OPI so you can re-use it for subsequent installations:

1. Disconnect the OPI and block, if used.
2. Reconnect the receive cable to the radio.

Make sure the required safety labels and/or signs are present:

• Make sure a Radiation Hazard Caution label is present, 

legible, and visible on the feed arm and on the back of the 
antenna reflector.

• If the antenna is enclosed by a fence, make sure a Radiation 

Hazard Caution sign is present, legible, and visible on the 
entrance gate.

• If the antenna is installed on a roof with a permanently 

mounted access ladder, make sure a Radiation Hazard 
Caution sign is present, legible, and visible on or near the 
ladder.

The antenna is now installed and pointed, ready for operation. 

To commission the IDU (remote terminal), refer to the IDU 
installation manual.