WatchGuard Technologies Water Heater SSL VPN Manuale Utente
Administration Guide
33
Using the Serial Console
• Download a sample email for users
Admin Users Tab
The Firebox SSL VPN Gateway has a default administrative user account with full access to the Firebox
SSL VPN Gateway. To protect the Firebox SSL VPN Gateway from unauthorized access, change the
default password during your initial configuration.
SSL VPN Gateway. To protect the Firebox SSL VPN Gateway from unauthorized access, change the
default password during your initial configuration.
Note
To reset the root administrative password to its default, you must reinstall the Firebox SSL VPN Gateway
server software.
server software.
The Firebox SSL VPN Gateway is preconfigured with the default user name of root and password of
rootadmin.
rootadmin.
To change the administrator password
1
In the Firebox SSL VPN Gateway Administration Portal, on the Administration tab, click Admin
Users.
Users.
2
Under Administrator Password, type the new password in the fields provided.
3
Click Change Password.
Logging Tab
This tab displays the log for the Firebox SSL VPN Gateway. This is the same log that is in the Administra-
tion Tool on the VPN Gateway Cluster > Logging tab.
tion Tool on the VPN Gateway Cluster > Logging tab.
Maintenance Tab
This tab provides you a place to do administrative tasks. These are:
• Uploading a signed certificate
• Uploading a private key and certificate
• Uploading a saved configuration or appliance upgrade
• Saving the appliance configuration
• Restarting and shutting down the appliance
• Uploading a private key and certificate
• Uploading a saved configuration or appliance upgrade
• Saving the appliance configuration
• Restarting and shutting down the appliance
You can also log off from the Administration Portal by clicking Log Out.
Using the Serial Console
You can use the serial console to set the IP address and subnet of the Firebox SSL VPN Gateway Interface
0, as well as the IP address of the default gateway device. All other configuration must be done using the
Administration Tool. You can also use the serial console to test a connection with the ping command.
If you want to reach the Firebox SSL VPN Gateway through the serial console before making any config-
uration settings, use a serial cable to connect the Firebox SSL VPN Gateway to a computer that has ter-
minal emulation software.
0, as well as the IP address of the default gateway device. All other configuration must be done using the
Administration Tool. You can also use the serial console to test a connection with the ping command.
If you want to reach the Firebox SSL VPN Gateway through the serial console before making any config-
uration settings, use a serial cable to connect the Firebox SSL VPN Gateway to a computer that has ter-
minal emulation software.