Brother XL-2600 Guida Al Funzionamento
KNOWING YOUR SEWING MACHINE ——————————————————————————————————————————————
22
6
Put the thread behind the guide above the
needle.
needle.
• The thread can easily be passed behind
the needle bar thread guide by holding
the thread in your left hand, then
feeding the thread with your right hand.
the thread in your left hand, then
feeding the thread with your right hand.
1 Needle bar thread guide
7
IMPORTANT:
Thread the needle from front to back leaving a
thread tail of about 5 cm (2 inch).
• If your sewing machine is equipped with a
thread tail of about 5 cm (2 inch).
• If your sewing machine is equipped with a
needle threader, use the needle threader to
thread the needle (see next section).
thread the needle (see next section).
1 5 cm (2 inch)
Note
● If the thread take-up lever is lowered, the
upper thread can not be wrapped around
the thread take-up lever. Make sure you
raise the presser foot lever and the thread
take-up lever before you feed the upper
thread.
the thread take-up lever. Make sure you
raise the presser foot lever and the thread
take-up lever before you feed the upper
thread.
● If you incorrectly feed the thread you may
cause sewing problems.
Using the Needle Threader (for models
equipped with a needle threader)
equipped with a needle threader)
This feature is only available on certain models.
1
Turn the power off and lower the presser foot
lever.
lever.
2
Raise the needle to its highest position by
turning the handwheel toward you
(counterclockwise) so that the mark on the
handwheel points directly up.
turning the handwheel toward you
(counterclockwise) so that the mark on the
handwheel points directly up.
1 Needle holder
2 Needle threader lever
2 Needle threader lever
Note
● When you use the needle threader, make
sure the needle holder is in the highest
position, otherwise the hook may be
damaged.
position, otherwise the hook may be
damaged.
3
While lowering the needle threader lever,
hook the thread onto the guide.
hook the thread onto the guide.
1 Needle holder
2 Needle threader lever
3 Guide
2 Needle threader lever
3 Guide
1
1
2
3
XL2600.book Page 22 Thursday, November 4, 2004 9:46 PM