Century SMART MOVE PM-1634AB 6/01 Manuale Utente

A Loosen harness straps:

Pull and hold upper belt tab.

Pull harness straps out.

B Remove both harness strap loops from 

Splitter Plate on back of car seat.

C Change harness strap slots.

Make sure harness straps are threaded 
through matching slot of seat pad and 
car seat.  

It may be necessary to remove seat pad 
from top of car seat.

D Re-attach harness strap loops to Splitter 

Plate (fig. e):

Put Top right strap loop on Splitter 
Plate first, then attach Top left strap 
loop.

NOTE: Make sure ends of straps are
in front of Splitter Plate as shown.

Put Bottom right strap loop on Splitter 
Plate first, then attach Bottom left strap 
loop.

• Make sure both strap loops are securely

attached within Splitter Plate hook.

• Make sure strap is NOT twisted and

is routed between adjuster lever and
car seat shell (fig. f).