Yale CB512X Dépliant

1. Connect the shredder with power source in accordance with 

the power specifications indicated on the bottom label of the 
head. Turn the switch to the “On/Auto” position, the shredder 
is at the standby mode.

2. Place the paper, credit card of CD in the relevant insertion slot, 

the shredder will automatically start to work and restore to the 
standby mode when the process is complete.

3. In a normal shredding process, if you suddenly change your 

mind and want to keep the remainder paper, you can turn the 
switch to the position “REV”, the shredder will roll your paper 
out immediately (You would not get any information from the 
CD or Credit Card as long as they had been destroyed).

4. If excessive paper has been fed at once, the shredding speed 

might be very slow or even stop, in this case, you should turn 
the switch to the state of “REV” at once and reduce the 
amount of paper to resume the shredding process.

5. For continuous paper shredding in large quantity, it is 

recommended not to feed over seven pieces of paper each 
time and minimize the consecutive using time to 2 minutes. 

Hence, you can properly protect your shredder for 
higherefficiency.

6. If the shredder is jammed for a long time or high internal 

temperature after continuous paper shredding in a large 
amount, the shredder will be shut down as a result of preset 
temperature protection. Turn the power off for a while, the 
shredder will then automatically resume to the standby mode.

7. Place the paper being shredded is comparatively wet or with 

long fiber contents, group blades might be wrapped up with 
too much paper, which will affect the efficiency of shreddin. In 
this case, made the shredder running clockwise or 
counterclockwise in turn for two or three times by sliding the 
switch between the state of “On/Auto” and “REV” for two or 
three times, wastepaper then can be cleaned automatically off 
those group blades.

8. Since certain safety protection has been preset intentionally, 

the shredder can not startup normally if the head is moved 
away from paper backet or the head is not placed at proper 
specified level over the basket.

1. Please locate the shredder at places nearby power socket for 

quick power disconnection in emergency.

2. Please be aware of the safety alert label on the cover of 

shredder, be sure to ensure human body safety by prevention 
tie, jewellery or hair from being placed into the machine.

3. Please never place non-paper goods such as clip, plastic bag 

or cloth into the shredder to avoid shredder damage and lower 
the shredding performance.

4. While cleaning the shredder or cleaning out the paper basket. 

Please turn the switch to the state of “Off” and unplug the 
power. Please clean out the basket regularly.

5. In order to ensure long using life and good performance of the 

shredder, please do not run the shredder in the environment 
with heat or wet sources for a long time.

6. Do not renovate the internal structure of the shredder or power 

connection cable in any way by yourself. Do not use the 
shredder if the body or cable is damaged, contact with your 
dealer or dial the service hotline.

7. Please keep the shredder away from children and pets.

Shredder Type: 

Cross-cut & CD break

Cut size (mm): 

4*25 / Shred CD into 3 pcs

Capacity: 

7 sheets (70g) / 1pc CD

Speed: 

  3m/min (7 sheets)

Throat width (mm): 

228

Size (mm): 

330X240X395

Paper Basket Capacity (Liter):  20
CD Basket Capacity (Piece): 

20

Net weight (kg): 

5.5

The Meadows, Cannock Road, Wolverhampton WV10 0RR, England

Tel:  +44 (0) 1902 364 647     Fax:  +44 (0) 1902 867 158