Symmetricom Disciplined Rubidium Oscillator 5402 Manuale Utente
Operating Manual
Operation
PN 8500-0150, Rev. A, May 2005
12
Description:
nnnnnn - Base number for Ko1; nnnnnn (000000 to 999999) represents a number from 0 to
0.999999. Ko1 controls the cut off frequency of the offset error noise filter.
0.999999. Ko1 controls the cut off frequency of the offset error noise filter.
oooooo - Base number for Ko2; oooooo (000000 to 999999) represents a number from 0 to
0.999999. Ko2 controls the cut off frequency of the frequency error noise filter.
0.999999. Ko2 controls the cut off frequency of the frequency error noise filter.
Response Format:
Enter Disgain
Command Format:
Description:
ddddd - Base number for Disgain; ddddd (00000 to 99999) controls gain common to both the
offset error and the frequency error paths of the discipline loop.
offset error and the frequency error paths of the discipline loop.
Response Format:
Enter Resync Threshold
Command format:
Description:
rrrrrr.rrr - Resync Threshold; rrrrrr.rrr (microseconds) is the limit value that determines if a
resync will occur when disciplining restarts. A resync will always be occur after power up.
resync will occur when disciplining restarts. A resync will always be occur after power up.
Response Format: