Sears 486.24321 Manuale Utente
5
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
DO NOT RETURN TO STORE
FIGUre 3
step 3:
(see FIGUre 3)
•
Tighten all hex nuts and bolts, following the same
sequence as assembled in steps 4, 5 and 6.
sequence as assembled in steps 4, 5 and 6.
do not
collapse tube when tightening.
•
Assemble a spacer and then a 1/2" flat washer onto
each end of the axle.
each end of the axle.
AXLE
SPACER
1/2" DIA.
FLAT WASHER
step 4:
(see FIGUre 4)
•
Place the wheel (long end of hub first) onto the end of
the axle that has no indents.
the axle that has no indents.
•
10. Place a 1/2" flat washer onto the axle and then
lightly tap a hub cap onto the axle until it is snug
against the washer and wheel hub.
lightly tap a hub cap onto the axle until it is snug
against the washer and wheel hub.
1/2" FLAT
WASHER
WASHER
HUB CAP
END WITH NO
CROSS HOLE
CROSS HOLE
FIGUre 4
step 5:
(see FIGUre 5)
•
Place the drive wheel onto the end of the axle that
has an indent. The long end of the hub goes to the
inside.
has an indent. The long end of the hub goes to the
inside.
•
Place a hub cap onto the end of the axle. Using a
small hammer, lightly tap the hub cap until it is snug
against the wheel.
small hammer, lightly tap the hub cap until it is snug
against the wheel.
FIGUre 5
HUB CAP
step 6:
(see FIGUre 6)
•
In order to assemble the hitch bracket to the hitch
tube, turn the spreader upright on its wheels.
Assemble the bracket to the top of the hitch using two
1/4" x 1" hex bolts and 1/4" nylock nuts.
tube, turn the spreader upright on its wheels.
Assemble the bracket to the top of the hitch using two
1/4" x 1" hex bolts and 1/4" nylock nuts.
FIGUre 6
1/4" x 1"
HEX BOLT
HEX BOLT
1/4" NYLOCK
NUT
NUT
HITCH PIN
HAIR COTTER PIN