Ricoh TRC-239 Manuale Utente
8
When the TX/BATT indicator lights steadily or the
TRC-239 stops operating properly, replace the bat-
teries.
TRC-239 stops operating properly, replace the bat-
teries.
Warning: Dispose of old batteries promptly and
properly. Do not burn or bury them.
properly. Do not burn or bury them.
Caution: If you do not plan to use the TRC-239 with
internal batteries for several months, remove the bat-
teries. Batteries can leak chemicals that can destroy
electronic parts.
internal batteries for several months, remove the bat-
teries. Batteries can leak chemicals that can destroy
electronic parts.
Using Rechargeable Batteries
Rechargeable batteries come fully discharged. Be-
fore you use them for the first time, you must charge
them. You can charge the batteries while they are in
the battery compartment using a battery charger,
such as RadioShack Cat. No. 23-349 (not supplied).
Or you can use an optional external battery charger
(not supplied).
fore you use them for the first time, you must charge
them. You can charge the batteries while they are in
the battery compartment using a battery charger,
such as RadioShack Cat. No. 23-349 (not supplied).
Or you can use an optional external battery charger
(not supplied).
Warning: Do not try to charge non-rechargeable bat-
teries. They might get very hot and they could ex-
plode.
teries. They might get very hot and they could ex-
plode.
Follow these steps to charge nickel-cadmium or
nickel-metal hydride batteries in the TRC-239’s bat-
tery compartment.
nickel-metal hydride batteries in the TRC-239’s bat-
tery compartment.
1. Rotate
VOLUME
upward until it clicks.
2. Set the battery charger’s Ni-Cd/Ni-MH selector
switch to the appropriate position.
3. Insert the charger's barrel plug into the TRC-
239’s
POWER
jack.
21-1628.fm Page 8 Tuesday, January 25, 2000 9:30 AM