Rel Acoustics Storm Manuale Utente
4
R/H
L/H
Amplifier Speaker
Outputs
Red Yellow
Neutrik Speakon
Interconnect
(Supplied)
Black
To Subwoofer
High Level Input
High Level Input
Fig. 1
2.
Connect the Mains lead to STORM and to the mains and switch ON.
To Connect to a Dedicated Sub-woofer Output:
See Fig. 2
See Fig. 2
1. For this connection it will be necessary to use whatever type of
connector is needed by this output. Normally it would be a phono type
connector. For this method of connection a phono to phono type
interconnect is required, available from your dealer.
connector. For this method of connection a phono to phono type
interconnect is required, available from your dealer.
Note:- If only a single phono subwoofer output is available, either use a ”y”
splitter to connect the two phono plugs from the REL or use a single
phono to phono interconnect. This will reduce the volume by 6db.
phono to phono interconnect. This will reduce the volume by 6db.
Amplifier Dedicated
Subwoofer Outputs
Subwoofer Outputs
Phono to Phono Interconnect
(Optional Extra)
To Subwoofer
Low Level Input
Low Level Input
Fig. 2
2.
Plug one end of the phono to phono interconnect into the dedicated
sub-woofer outputs on your power amplifier or surround processor
and the other end into the line level input on STORM.
sub-woofer outputs on your power amplifier or surround processor
and the other end into the line level input on STORM.
R B R B
R/H
L/H