Pure Digital EVOKE 1XT Manuale Utente

Pagina di 8
6
Sw version
Displays the version of the software in your radio. You may be asked to quote this if you contact Technical Support.
Sw upgrade
You can upgrade the software in your EVOKE-1
XT
 using a PC connected to the USB port on the rear panel. To upgrade, 
select Sw upgrade and follow the instructions provided with the software. Upgrades may be issued to provide enhanced 
functions or improve performance. Check our website at www.puredigital.com for details of when software upgrades are 
available. To exit the software upgrade menu press the Menu button again.
Tuning aid
Provides a signal level display which you can use to find the best position for your radio and aerial.
1.    Turn the Tune knob to scroll through different channels and push to select one (UK stations are in the range 11B 
to 12D). You see a signal level display. The empty block indicates the minimum required level for reception and the 
filled blocks indicate the current level.
2.    Move your aerial while watching the display and to try to raise the current level to the empty block or beyond. Once 
you have a good signal the display will show the multiplex name and add the stations to the station list.
3.    Push the Menu button to exit the tuning aid or turn the Tune knob to select another channel.
Note You can also display the signal level at any time for a station you are listening to by pushing the Tune knob.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear at low volume or in a noisy 
environment. The DRC (Dynamic Range Control) level of a broadcast is set by the station and sent with the signal. At 
the time of writing in the UK only stations such as BBC Radio 3 and 4 regularly broadcast a DRC level. Check with the 
broadcasters to find out if they use DRC on their stations. Turn the Tune knob to scroll through the following options and 
push to select one:
DRC 0 
DRC is switched off. Any DRC level broadcast will be ignored. This is the default setting.
DRC ½  DRC level is set to ½ that sent with the broadcast.
DRC 1 
Applies the DRC level as sent with the broadcast.