Pro-Ject Audio Systems Headphones Pro-Ject Head Box Manuale Utente
© Audio Trade GmbH · Pro-Ject Head Box II · Revision 1.4.07/1.4.07
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO headphone amplifier.
thank you for purchasing a PRO-JECT AUDIO headphone amplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connection to the amplifier (recorder)
Connect the TAPE OUT RCA/phono sockets from your amplifier to the In RCA/phono sockets of the
headphone amplifier. The Out RCA/phono sockets of the headphone amplifier can be connected to the input
sockets of your recorder.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left
channel black or white.
headphone amplifier. The Out RCA/phono sockets of the headphone amplifier can be connected to the input
sockets of your recorder.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left
channel black or white.
Connecting the headphones
Connect the headphones to the ¼“ (6,3mm ∅) jack socket on the front of the headphone amplifier. Use the
control knob to adjust the level to the required volume.
control knob to adjust the level to the required volume.
!
Please turn the volume level to minimum before connecting the headphone.
Minimum impedance of the head phone 30ohms.
Minimum impedance of the head phone 30ohms.
Headphone replay
Use the input selector of the amplifier to choose the source you wish to hear.
Mains power connection
The headphone amplifier is supplied with a power supply suitable for your country's mains supply. Check the
label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage
label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage
plug from the power supply to the Power ~16V socket before connecting the power supply to the mains.
Technical specifications Pro-Ject Head Box II
Power output:
330mW/30ohms, 60mW/300ohms
Headphone connection: > 30ohms
Signal to noise:
Signal to noise:
187dB (100dB - A weighted) at full output
Frequency response:
30Hz – 20kHz/-0,05dB (10Hz – 120kHz/-1dB)
THD (IMD):
0,005% (0,001%)
Gain: 11dB
Headphone jack:
Headphone jack:
3-pole ¼“ (6,3mm ∅) phono socket
Power consumption:
16V/120mA AC
Power supply type:
Mains-fed outboard power supply, suitable for your country's mains supply
Output voltage:
16V/500mA AC
Dimension W x H x D:
103 x 38 x 127mm
Weight: 600g
without
power
supply