Panasonic Arbitrator 360 Guida Al Funzionamento

Pagina di 28
19
(4) Remove the key.
Turn the key counterclockwise to 
[   ]
, and remove it.
SDHC Memory Card Insertion and Removal 
(continued)
Removing an SDHC Memory Card
(1)  Open the SDHC Memory Card 
slot cover 
(see previous page).
(2)  Push the center of the card 
until it clicks so that the 
SDHC Memory Card pops out 
then pull it out straight.
(3)  Close the SDHC Memory Card 
slot cover.
Return the SDHC Memory Card 
slot cover to its original closed 
position and press the section 
marked  PUSH .
Note:
If an SDHC Memory Card was 
removed while it was being 
accessed, the files may be 
corrupted. The corrupted files are 
automatically repaired. 
(For details, refer to “Restoring 
Files Automatically” in Section 2: 
Operation.)
Note: 
The [BUSY] lamp blinks for a few 
seconds when the SDHC Memory 
Card slot cover is opened. Make 
sure that the blinking has stopped 
before removing an SDHC Memory 
Card.
(4) Remove the key.
Turn the key counterclockwise to 
[   ]
, and remove it.
(3)  Close the SDHC Memory Card 
slot cover.
Return the SDHC Memory Card 
slot cover to its original closed 
position and press the section 
marked  PUSH .
When you close the SDHC Memory 
Card slot cover after inserting an SDHC 
Memory Card, the [READY] lamp 
indicates the recorder status.
(Refer to “Indicator Lamps and 
Recorder Status” in Section 2: 
Operation.)