Toshiba Telephone CIX-UG-STDTELVB Manuale Utente

The term “flash” is used in a number of feature instructions. Since many standard 
telephones have a 

Flash

 button, this guide assumes that you have one. If your 

standard telephone does not have a 

Flash

 button, perform the following to “Flash the 

hookswitch.”

ä

To manually flash the hookswitch, while on a call, press the hookswitch down 
about 1/2 second, then release it.

You should hear dial tone after doing this. 

Some outside line features, such as conferencing, Centrex, or behind PBX operation 
require “flashing the outside line,” to dial Centrex/PBX feature access code or 
extension numbers.

ä

1. Momentarily press the hookswitch for about 1/2 second. After you press the 

hookswitch, you hear dial tone. This hookflashes the Toshiba system only.

2. Press

 #45

. You hear Centrex or PBX dial tone. You can now dial a Centrex or 

PBX feature access code or extension number.

Off-hook Preference is an option used to connect to Internal Dial tone or an outside 
line when going off-hook to make a call (Requires Release 4.1 and above software).

Check with your System Administrator to determine your telephone’s Off-hook 
selection.

ä

If your telephone selects internal dial tone

•

Dial the extension number of the internal station you wish to connect to.
...or

•

Dial 9 or a line access code to connect to an outside line.

ä

If your telephone selects an outside line, dial the telephone number of the outside 
party you wish to connect to.