Pacific Digital Digital Pacific USB Digital Photo Frame MemoryFrame Manuale Utente

Pagina di 63
MemoryFrame User’s Manual 
 
Copyright© 2002 Pacific Digital Corporation
  
Page 45 
 
10.4 
How to change the decorative 5 x 7 frame 
Follow these instructions to remove and reinstall your MemoryFrame 
Decorative frame. 
To remove decorative frames from MemoryFrame 
  Read the section of the manual “Caring for the Screen” 
(Chapter 9) before removing the decorative frame. Try to 
avoid touching the LCD screen during this process. 
  MemoryFrame has two “frame lock” tabs on the rear of the 
unit.  These are used to lock a decorative 5x7 frame in place. 
There are two locations, one on each side. The “Locked” 
position is toward the outside of the unit. 
  Pick up MemoryFrame with the LCD screen facing away 
from you and fold in the Stand from the rear of the 
MemoryFrame.  Grasp the edges of the frame with thumbs 
against the “frame lock” tabs on the rear of the unit. 
  Apply strong thumb pressure inward towards the center of 
the frame until the frame locks are in the unlocked position.  
A noticeable “click” may be heard when unlocked.  
   The wood 5x7 picture frame can now be pulled away from 
the face of the MemoryFrame housing. 
 
To install decorative frames on the MemoryFrame 
  Read the section of the manual “Caring for the Screen” 
(Chapter 9) before removing the decorative frame. Try to 
avoid touching the LCD screen during this process. 
  After removing (as described above) the wood 5x7 picture 
frame that came with MemoryFrame, place your new wood 
5x7 frame onto the face of the MemoryFrame housing. 
  Pick up MemoryFrame with the LCD screen facing away 
from you and grasp the edges of the frame with thumbs 
against the “frame lock” tabs on the rear of the unit. 
  Apply strong thumb pressure outward towards the edges of 
the frame until the frame locks are in the locked position.  A