Pacific Digital Digital Pacific USB Digital Photo Frame MemoryFrame Manuale Utente

Pagina di 63
MemoryFrame User’s Manual 
 
Copyright© 2002 Pacific Digital Corporation
  
Page 48 
 
 
Figure 22 – Examples of wood frames 
 
Size of Frames that Fit MemoryFrame 
The frames can be of various dimensions, but they must fit 5” x 7” 
pictures.  The inner dimensions of frames that fit are approximately 
11.9cm x 17 cm.  The outer dimensions of the frames that work can vary 
by as much as 2 cm in each direction.   For example, as you can see in 
the Figure 22, the rear-middle frame shown is slightly wider and taller 
than the rest and this is fine. 
Types of 5 x 7 Frames that Fit MemoryFrame 
In general, most 5 x 7 frames come in three different basic types in terms 
of how the photo and the stand mechanism are retained (secured) into the 
frame.  These three types are briefly described below.  The first two 
types are not usable by MemoryFrame, and only the third type described 
will fit MemoryFrame:  
1.  Some 5x7 frames supply retention for the photo and the stand 
mechanism by having metal clips attached to the wood itself which 
either swivel or bend over the stand mechanism to provide retention.   
Please note, that MemoryFrame cannot use this type of frame, 
so purchase only type #3 below.
 
2.  The second type of 5x7 frames have a slot in the bottom such 
that the glass, picture, and stand-mechanism all slide up from the 
bottom of the frame.   Please note, MemoryFrame cannot use this 
type of frame, so purchase only type #3 below.