TOA Electronics ALARM INPUT UNIT C-AL80(H) Manuale Utente
14
AR
AR
M
UN
IT
C-A
L80
C-AL80
5x12 S-tight screw
(supplied with MB-23B)
(supplied with MB-23B)
Fiber washer
(supplied with MB-23B)
(supplied with MB-23B)
supplied with MB-23B
M4x12 binding head screw
(supplied with MB-23B)
(supplied with MB-23B)
9. RACK MOUNTING
When mounting the C-AL80 Unit in an equipment rack, remove 4 plastic feet on the bottom plate and attach
an optional MB-23B mounting bracket.
an optional MB-23B mounting bracket.
Note
• Use the Alarm Input Unit in locations with ambient temperature of between +0°C and +40°C.
• Be sure to mount the Alarm Input Unit below the heat generating components, and mount the perforated
• Use the Alarm Input Unit in locations with ambient temperature of between +0°C and +40°C.
• Be sure to mount the Alarm Input Unit below the heat generating components, and mount the perforated
panel between the Alarm Input Unit and such a heat generating component as required.
• Avoid installing the Alarm Input Unit in locations exposed to vibration.