Tektronix Camcorder 2200 Manuale Utente
2-19
Transition Subpanels
Pressing
CUT
cannot, however, complete a transition begun with
the
lever arm
. In this case,
CUT
reverses the inputs during the
background transitions. During key transitions, it changes the
logic state of the key.
logic state of the key.
E-MEM recall operations result in another set of conditions for
lever arm
transitions. When an E-MEM recall places a transition at
a point different from the actual position of the
lever arm
, the
lever
arm
becomes inactive until it is moved to catch up with the
transition. For example, assume the
lever arm
is on a limit and an
E-MEM recall puts the transition at some midpoint. In such a case,
the
the
lever arm
would be inoperative until you moved it far enough
to catch up with the transition. At that point, you could use the
lever arm
to complete the transition or return it to the beginning
limit. (Or, you could press
AUTO TRANs
to complete the
transition). Another example of use with E-MEM is a case where
the
the
lever arm
is off limit and an E-MEM recall puts the transition
on a limit. In this instance, both lever direction lights would be lit,
indicating the
indicating the
lever arm
is inoperative. Moving the
lever arm
to
either limit will turn the direction lights off and reactivate the
lever arm
. (You could also use
AUTO TRANs
to resume the
transition since auto transitions continue to function even when
the
the
lever arm
is inoperative.)
Pressing the
AUTO TRANs
button starts an automatic S-
linear transition at the rate displayed on the LEDs next to
the button.
the button.
Auto
Trans
0 6 0