Taurus Group DUAL BAY STORAGE S2 Manuale Utente

  

 

 

 

The data can be 

accessed even 

during the rebuild 

process. 

 

 

 

T

flash red during the 

r

 

 

plement, 

otherwise the total amount of the space that can be used will 

ity. RAID 1 creates 

t 

ser will only 

e as large as a single drive but when one of the hard drives 

fails, it can be replaced and the data rebuilt automatically. 

. 

 the corresponding LED will flash red and 

reen in intervals. To replace the faulty drive, do the following: 

. 

Open the enclosure and replace the faulty hard drive. If 

tive, remove it, connect the second HDD to 

 install a new HDD at HDD2. If HDD2 is 

Turn the power ON and let it rebuild the data. It will 

s 

When all the data is backed up, the LEDs will turn green. 

he HDD LEDs will 

ebuild process,. 

 

SAFE: This mode requires 2 identical drives to im

depend on the drive with the smallest capac

an exact copy or mirror of a set of data on the second drive.  

 

This is useful when reliability and backup are more importan

than data capacity. The available capacity to the u

b

 

The Taurus enclosure has an Error LED indication at the front 

to show when one of the drives can not be accessed anymore

When a drive fails,

g

 

1. Turn off the Taurus and remove both the power supply and 

the interface cable

2. 

HDD1 is defec

HDD1 and then

defective, replace the drive with a new HDD. 

3. Finish the assembly and connect the power supply. 

4. 

automatically copy all the data from HDD1 to HDD2 to 

create a backup. 

5. The HDD LED will flash red just like during data access a

long as the data is being rebuilt. This process will take 

several hours, depending on the capacity of your hard 

drives. 

6. 

 

 

is referring to the backup drive at CN1.