Panasonic Arbitrator 360 Guida Al Funzionamento
Trigger On or Off setting
Select “Action” from the followings
for the detection of trigger signals
“REC”
“STOP”
“AUTOZOOM”
“CAM1”
“CAM2”
“CAM1REC”
“CAM2REC”
“CAM1LED”: Change ON/OFF of
REC lamp on the Front Camera
(AG-CK10P)
“NONE”: No operation
for the detection of trigger signals
“REC”
“STOP”
“AUTOZOOM”
“CAM1”
“CAM2”
“CAM1REC”
“CAM2REC”
“CAM1LED”: Change ON/OFF of
REC lamp on the Front Camera
(AG-CK10P)
“NONE”: No operation
Select the Detection from the followings and
choice of detection depends on “Action”:
choice of detection depends on “Action”:
1. In “REC”, “CAM1REC”, “CAM2REC” at Action,
Select the detection from
Select the detection from
“H”, “Level H”, “L”,
“Level L”, “B”.
2. In “CAM1”, “CAM2”, “CAM1LED”, “AUTOZOOM”,
“STOP” selected the detection from
“STOP” selected the detection from
“H”, “L”, “B”.
3. In “None”, select the detection from
“H”, “L”,
“SPEED” (Trigger 8 only)
Assign the characters to be used in the OSD.
*When SPEED is selected at the trigger,
“Printable” becomes ”-” and cannot be modified.
No OSD is displayed.
*When SPEED is selected at the trigger,
“Printable” becomes ”-” and cannot be modified.
No OSD is displayed.
(7) Trigger Set up
Press “APPLY” to apply
the setting changes.
the setting changes.
1.
Select “CONFIG” tab of SI and enter the password to log in.
2.
Then, press “CONFIG” and select “Triggers”.