Northern Modular Telephone Manuale Utente
• • • • 13 • • • •
Special features
Auto Dial Transfer
Auto Dial Transfer allows you to use your Auto Dial key to transmit digits to the central office after a
Trunk Switchhook Flash. You must be on a central office/exchange (CO) trunk call from or to a CO
which offers Centrex- or exchange line-type features.
Trunk Switchhook Flash. You must be on a central office/exchange (CO) trunk call from or to a CO
which offers Centrex- or exchange line-type features.
To use Auto Dial Transfer when you pick up an incoming trunk call:
1.
Press
and wait for interrupted dial tone.
2.
Press
ç
to call the number desired.
3.
Replace the handset or press
R to end the call.
Attendant Recall
The Attendant Recall feature allows you to contact an attendant during a call and connect the call to
the attendant.
the attendant.
To contact the attendant during a call:
1.
1.
Press
å during a call.
2.
Stay on the line until the attendant answers.
3.
When you replace the handset, the caller remains connected to the attendant.
Call Transfer
Call Transfer allows you to direct a call to another number.
To transfer a call while on a call:
1.
1.
Press
†. The call is placed on hold and you hear dial tone.
2.
Dial the number to which you want to transfer the call.
3.
Press
† again, either when you hear ringback/ring tone, or after you talk privately to
the person to whom you are transferring the call.
Note:
On MSL-100, the call will be transferred once the transfer key in step three is pressed. Use
three-way call on MSL-100 to perform M-1 Call Transfer above.
Trunk Switchhook Flash