Jims USA Twin Cam Racekit Box 1 1208-1351 Manuale Utente
555 Dawson Drive, Camarillo, CA 93012 Phone 805-482-6913 • Fax 805-482-7422
5
Rev F
6/08
No.1208-1351
A Division of Thiessen Products, INC
IIn
ns
st
tr
ru
uc
ct
tiio
on
n S
Sh
he
ee
et
t F
Fo
or
r B
Bo
ox
x 1
1 1
12
20
0”
” O
Or
r 1
13
31
1”
”
E
En
ng
giin
ne
e A
As
ss
se
em
mb
bl
liie
es
s O
Or
r E
En
ng
giin
ne
e R
Ra
ac
ce
e K
Kiit
ts
s
Oil Filter Mount for Engine “A” 99-06 FL, 99-05 FXD
•
Remove from package and inspect for debris and imperfections.
•
Verify the package includes three (3) bolts with washers and one (1) locking flange.
•
Check that there are two o-rings present.
Tools necessary for box 1 installation: See Fig.4
3/8” drive torque wrench 5-75 ft/lbs
3/8” drive torque wrench 40-200 In/lbs
3/8” drive ratchet
7/8” deep socket
1/2” 12 point socket
7/16” socket
6” caliper
“A” TC Engine Stand, JIMS
®
No.1022
“B” TC Engine Stand, JIMS
®
No.902
Small brass punch, JIMS
®
No.1081
Small brass hammer, JIMS
®
No.1080
20W - 50 clean H-D
®
engine oil
Recommended Tools & Supplies
A small tooth brush
Several lint free cloths
A flashlight
One quart 20W-50 H-D
®
Motor Oil
The following are required to install the cylinder studs:
The furnished six long and two short studs.
The furnished Loctite compound 620.
One (1) furnished cylinder dowel pin tool (1/4” x 1/2”)
One (1) furnished Short Head bolt
A solvent to degrease the threads of each stud. Use Loctite primer, ace
tone, denatured alcohol, rubbing alcohol or other non-residue solvent for
this purpose.
tone, denatured alcohol, rubbing alcohol or other non-residue solvent for
this purpose.
Follow all manufacturer’s instructions and heed all warnings specific to
each chemical used.
each chemical used.
A small tooth brush (recommended)
A lint-free cloth.
A flashlight (recommended)
Fig.4 - Tools Required
Alpha Engine
stand shown
use on 99’-06’
JIMS No.1022
Beta Engine Stand
JIMS No.902 Use on all Betas