Biostar N4SLI-A9 Manuale Proprietario
N4SLI-A9
8
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
B
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
2.2 F
AN
H
EADERS
JCFAN1: CPU FAN Power Header
JSFAN1: System Fan Power Header (optional)
JNBFAN1: Northbridge Fan Power Header
JSFAN1: System Fan Power Header (optional)
JNBFAN1: Northbridge Fan Power Header
Pin
Assignment
1 Ground
2 +12V
2 +12V
JCFAN1
JNBFAN1 JSFAN1
1
3
1
3
1
3
3
FAN RPM rate sense
(Only for JCFAN1 and
JSFAN1.)
(Only for JCFAN1 and
JSFAN1.)
Note:
The JCFAN1 and JSFAN1 support system cooling fan with Smart Fan Control
utility. It supports 3 pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positive and should be connected
The JCFAN1 and JSFAN1 support system cooling fan with Smart Fan Control
utility. It supports 3 pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positive and should be connected
to pin#2, and the black wire is Ground and should be connected to GND.