Apacer Technology PH150 Dépliant
High-Speed USB 2.0 Hub
PH150 User’s Manual
Introduction
Thank you for purchasing the Apacer Hi-Speed USB 2.0 hub. The hub
provides four downstream USB ports allowing you to add more USB
peripherals to your computer. The PH150 is 100% compliant with USB 2.0
specification and is backwards compatible with USB 1.1 as well. The PH150
can support all of your existing USB devices.
peripherals to your computer. The PH150 is 100% compliant with USB 2.0
specification and is backwards compatible with USB 1.1 as well. The PH150
can support all of your existing USB devices.
Featuring a rotatable USB port design design, PH150 allows users to
easily connect multiple high performance USB peripherals and large devices
such as high-resolution video cameras, scanners, printers, storage devices and
others.
Features
such as high-resolution video cameras, scanners, printers, storage devices and
others.
Features
z
USB 2.0 High-Speed interface, supports transfer rates up to
480Mbps
480Mbps
z
Backwards compatible with USB 1.1 specification
z
Offers both bus-powered mode and self-powered mode
z
Automatic connection and speed detection
z
Over-current detection and protection
z
Two rotatable ports, easy to connect multiple devices and large
USB devices
USB devices
z
Plug-and-play, support hot swapping of USB devices
System Requirements
z
Pentium processor or higher
z
USB Interface: one free USB port (USB 2.0-compliant host is
required for operating at high-speed mode)
required for operating at high-speed mode)
z
O/S Support: Windows 98SE/ME/2000/XP, MAC OS 8.6 & above,
Linux kernel 2.4.0 & above (except MAC OS X, devices under all
other MAC O/S will only operate at 1.2 to 12Mbps)
Linux kernel 2.4.0 & above (except MAC OS X, devices under all
other MAC O/S will only operate at 1.2 to 12Mbps)
Packing List
z
PH150, High-Speed USB 2.0 4-port hub
z
USB extension cable
z
User’s Manual
Installation Notice
z
Windows will detect PH150 and install the required driver
automatically, please don’t connect any USB device to the hub
before auto installation is complete
automatically, please don’t connect any USB device to the hub
before auto installation is complete
z
If PH150 is connected to a USB 1.1 host controller, the max. USB
1.1 bandwidth of 12 Mbps is shared across all four ports
1.1 bandwidth of 12 Mbps is shared across all four ports
z
The hub can be used without the optional power adapter with
most USB devices
most USB devices
Specification
USB interface
USB 2.0 High-Speed
Extended ports
4 downstream (two ports are rotatable)
Power source
Bus-powered mode
Self-powered mode (max. 500mA)
Self-powered mode (max. 500mA)
Compatibility
ACPI, OHCI and EHCI compliant
Operating system
Windows 98SE/ME/2K/XP
MAC OS 8.6 & above
Linux Kernel 2.4.0 & above
MAC OS 8.6 & above
Linux Kernel 2.4.0 & above
Certifications
CE, FCC, BSMI, RoHS