Acclaim Lighting A5500 Manuale Utente

14

Whether detaching just the Camera Handpiece from the USB Umbilical and
using with additional Acclaim USB Umbilicals installed on other computers or
bringing the complete system (handpiece and umbilical), the Acclaim System is
easily shared among patient operatories.

Refer to the corresponding illustrations and perform the following when trans-
porting only the Camera Handpiece.

1. Retract collar of quick disconnect connector and simultaneously pull

straight from the Handpiece connector.

2. Release connector quick disconnect collar.
3. Store the USB Umbilical  by placing cable slide holder into the Handpiece

Holder.

4. Transport Handpiece to next operatory.
5. Connect Handpiece at new location by aligning the connector key with the

keyway of the mating USB Umbilical connector. 

6. Insert straight into Handpiece connector until it securely snaps into place.

When transporting the complete Acclaim System (handpiece and umbilical)
among patient operatories, simply disconnect the the USB connector end of the
USB Umbilical, transport the system and reconnect to the new computer. Make
sure that the computer in the new operatory is using compliant software. 

Quick Disconnect

Collar

Camera

Handpiece 

Quick Disconnect

Connector End

Control Umbilical

Handpiece Holder

Cable Slide Holder

Connector Key

Camera Handpiece 

Do not twist or turn the Handpiece Cable connector.  The connector is keyed and
mates straight on with Camera Handpiece connector

.