American Power Conversion AIRACPA4000 Manuale Utente

®

®

®

®

For you to be able to use FTP to upgrade a single Network Management 
Card over the network:

• The Network Management Card must be connected to the network.

• The FTP server must be enabled at the Network Management Card.

• The Network Management Card must have its TCP/IP settings 

(

, 

, and 

 addresses) 

configured.

To use FTP to upgrade the Network Management Card:

1. Open an MS-DOS command prompt window on a computer that is 

connected to the network. Go to the directory that contains the 
firmware upgrade files, and list the files. (For the directory 

C:\apc

, the 

commands would be those shown in 

):

C:\>

C:\apc>

Files listed for a Network Management Card, for example, might be the 
following:

–

apc_hw02_aos_228.bin

 

–

apc_hw02_nairpa_106.bin