American Power Conversion AIRACPA4000 Manuale Utente

®

®

®

®

To pre-configure the Network Management Card:

1. Use the link in the 

 menu to launch the Wizard application, and 

then click 

 on the opening screen.

2. Select the 

 option from the “Installation Options” 

screen, and then click 

.

3. Select the 

 option from the 

“Custom Installation” screen, and then click 

.

4. Configure your network settings. At a minimum, you must configure the 

TCP

/

IP

 settings (

, 

 and 

addresses). As long as the Network Management Card’s TCP/IP 
settings are configured before deployment, the Network Management 
Card can be reconfigured remotely at a later time.

5. Click 

 as many times as needed to cycle through the Network 

Management Card’s settings. Bypass any setting that you do not want 
to configure.

6. Stop at the “Customize the settings that will be transmitted to the 

Management Card” screen. Choose to transmit the TCP/IP settings 
(

, 

, 

 addresses, and 

) 

and any additional options you want to configure, then click 

.

7. Verify the selections you have made on the “Configuration Summary” 

screen. You can save or print the settings. If you save the settings, you 
can load them into the Wizard at a later time. Click 

.

8. Select the 

 option from the “Transmit Current 

Settings” screen, and then click 

.

If you intend to use the Wizard to reconfigure Network 
Management Cards, do not disable 

.