Brother MD-611 Manuale Proprietario
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
15
3-11. Connecting the power cord
1. Attach an appropriate plug to the
power cord (1). (The green and yellow
wire is the ground wire.)
wire is the ground wire.)
2.
Insert the plug into a
properly-grounded AC power supply.
properly-grounded AC power supply.
* The inside of the control box uses
single-phase power.
NOTE:
Do not use an extension cord. If this is
not observed, it may cause problems
with correct operation.
not observed, it may cause problems
with correct operation.
3-12. Installing the cotton stand
(1) Cotton stand
NOTE:
NOTE:
Fit the washer (2), and then securely
tighten the nut (3) so that the cotton
stand does not move.
tighten the nut (3) so that the cotton
stand does not move.
<Three-phase
specifications
>
<Single-phase
specifications
>
Green and yellow wire
(ground wire)
(ground wire)
5239Q
Green and yellow wire
(ground wire)
(ground wire)
2974B