Warn Industries ATV Winch Multi-Mount 2.5ci Manuale Utente

|  Warn Industries, Inc.

When installing your ATV winch system, read and

follow all mounting and safety instructions.
Always use caution when working with electricity

and remember to verify that no exposed electrical

connections exist before energizing your
winch circuit.

3

WARN 2.5ci Winch Multi-Mount Installation and Specification Guide  |

Attach the roller fairlead to the multi-mount plate, use

the provided:

• 3/8-16 x 3/4 in., hex bolts

• 3/8 in. lock washers.

• 3/8 in. hex nuts.

Secure the winch to the multi-mount plate, use the

provided:

• 5/16-18 x 1 in., grade 5 hex bolts.

• 5/16 in. lock washers.

• Torque bolts to 12 ft-lb (17 N-m).

Attach the clevis hook to the wire rope at this time.

• Put clutch in freespool position.

• Manually feed cable loop through the roller  fairlead.

• Attach hook to cable loop and re-engage clutch.

• The contactor is a primary safety feature in your

winch system. It disconnects your winch from its

power source when the ATV is not in use. The
contactor must be correctly installed to work

properly.

• It is recommended that the contactor be

mounted close to the battery and in a location

that is as clean and dry as possible. Exact

location will vary, depending on the ATV. Usual
locations include inside, on top, or on the side of

rear storage box, and on a few models, under

the seat.

• Ensure the contactor mounting location selected

provides sufficient clearance from all metal

structures such as frame tubes. DO NOT place

tools or other items in a position that might come
in contact with the contactor directly.

• Drill the mounting holes for the contactor at this

time, then move on to step four as it will be
easier to attach all the wiring to the contactor

before attaching it to the ATV. DO NOT mount the

contactor at this time.

4