WindChaser PACR9S Manuale Utente
While air conditioning, the unit automatically dehumidifies the air in the room.
The water from dehumidification is stored in a collecting tank and then immediately
“evaporated” and evacuated via the warm air outlet duct.
However, when it is extremely humid, the collecting tank may fill up. In this case, the Alarm
Indicator Light (2, Fig. C) turns on and the air conditioner switches itself off.
The water from dehumidification is stored in a collecting tank and then immediately
“evaporated” and evacuated via the warm air outlet duct.
However, when it is extremely humid, the collecting tank may fill up. In this case, the Alarm
Indicator Light (2, Fig. C) turns on and the air conditioner switches itself off.
It is then necessary to drain the water through the condensate drain hose
(6, Fig. B).
Place the drain hose (6) above an empty container
Remove the plug and to let the water run out (the capacity of the collecting tank is about 1.5 pts).
Refit the plug and put the condensation drain hose back in its original position.
(6, Fig. B).
Place the drain hose (6) above an empty container
Remove the plug and to let the water run out (the capacity of the collecting tank is about 1.5 pts).
Refit the plug and put the condensation drain hose back in its original position.
DRAINING EXCESS CONDENSATE WATER
FAHRENHEIT AND CELSIUS DISPLAY BUTTON
The temperature readings can be switched between fahrenheit and celsius by pressing the F/C button on
the remote. When the remote control is turned on for the first time, fahrenheit will be displayed first.
Pressing the F/C button will then display the temperature in celsius. To return the temperature display
back to fahrenheit, press the F/C button again.
8