Walker W1100 Manuale Utente
E
N
G
G
L
I
S
H
7
Warning: To prevent electrical shock,
always remove the telephone line cord
from the wall jack before removing the
cord from the telephone. Never leave the
line cord connected to the wall jack if it is
not also connected to the telephone.
always remove the telephone line cord
from the wall jack before removing the
cord from the telephone. Never leave the
line cord connected to the wall jack if it is
not also connected to the telephone.
AC adapter should be unplugged when not
in use.
in use.
➤ Select a Location:
• This unit requires a modular phone jack
and a standard 120 volt outlet.
and a standard 120 volt outlet.
• The unit should be located in an area
where it is easy to see the lighted ringer.
where it is easy to see the lighted ringer.
• The unit can be used as a desk top
phone or a wall mount phone.
phone or a wall mount phone.
Avoid placing the unit where it will be
exposed to excessive heat or humidity.
exposed to excessive heat or humidity.
INSTALLATION
➤ Connecting
the Clarity Phone:
To install as a Desk Unit:
• Plug one end of the telephone line cord
(long, flat) into the back of the Walker
Clarity.
(long, flat) into the back of the Walker
Clarity.
• Plug the other end of the telephone line
cord into the wall jack.
cord into the wall jack.
• Plug one end of the handset cord (coiled)
into the bottom of the handset.
into the bottom of the handset.
• Plug the other end of the handset cord
into the jack located on the left edge of the
Walker Clarity.
into the jack located on the left edge of the
Walker Clarity.
• Place the handset in the cradle of the
Walker Clarity.
Walker Clarity.
• Connect AC adapter into back of unit and
plug directly into standard 120 volt outlet.
plug directly into standard 120 volt outlet.