McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manuale Utente

McDATA UltraNet Edge 3000 User Guide

•

If you are creating a 1x1 configuration, the only selectable routing 
type is Dedicated Circuit. All other options in this dialog box are 
grayed out and ignored.

•

The options selectable from this dialog box are limited by the 
license key for the node. If the license key does not provide 
support for the Fail Over and Load Balancing network routing 
types, only the Dedicated Circuit network routing type is 
selectable, and all other options on this dialog are grayed out.

•

If you have not entered the licensing information for each node in 
the circuit using the License Wizard, only the Dedicated Circuit 
network routing type is selectable from this dialog box.

•

If you want to change the Network Routing Type after you have 
created the data paths, double-click the F/C interface on the 
Network Map. Click the Network button at the bottom of the F/C 
interface dialog box (FC10 - Node10) and select the Network 
Routing Type. You do not need to create the data paths again to 
change the Network Routing Type.

The Create Data Path Wizard - Choose Data Path Options screen 
appears.

6. E_port Disk Streaming increases performance in networks that 

have a round trip latency greater than 10 ms. It moves data more 
efficiently than our standard E_port solution. To enable the 
E_port Disk Streaming feature, check the Enable Disk Streaming 
check box.