LogTag Recorders LogTag Analyzer Temperature Recorder Manuale Utente

In this screen you will see one of the following pictures next to each of the items in the 
list: 

ƒ  (no picture) indicates the software is still using this communications port. 

ƒ 

 Data was successfully retrieved from the LogTag and stored/saved to disk. 

ƒ 

 Data was successfully retrieved from the LogTag but there was no need to save 

the information to disk. 

ƒ 

 The software was unable to detect an Interface Cradle connected to the 

communications port or was unable to detect a LogTag in the Interface Cradle. 

ƒ 

 The LogTag is a single use logger and cannot be prepared for use again and 

should therefore be returned to the supplying distributor or agent once you have 
finished with the LogTag. You will still be able to continue to retrieve information 
stored within the LogTag. 

The LogTag should be almost instantly recognized by serial number and the number of 
readings. It is possible to have and use more than one communication port at a time and 
if so, the wizard will find all the LogTags. 

The communication ports that are not in use (the ones that initially are reported with the 

 mark) can be removed from view by selecting an 

. You don't have to do that 

now, but you can do it later to clean up the "wizard window" appearance. 

To get to the next screen, click on 

 and the third wizard step screen will 

appear. The software will automatically proceed to the next wizard step, as if the user 
clicked on 

, if each of the Interface Cradles detected have a LogTag detected 

in them and the information within the LogTag was successfully retrieved.