Linksys Telephone Accessories PAP2-IG-v 1-0-042805 Manuale Utente
Linksys PAP2 Installation Guide
Page 3
PAP2 MENU OPTIONS
Action
Code
User Input
Behavior Notes
Enter IVR Menu
****
None
Do not press any other keys
until you hear, “Configuration
menu. Please enter option
menu. Please enter option
followed by the pound (#)
key, or hang up to exit.”
Check DHCP
100
None
The system announces if
DHCP is enabled or disabled.
Set DHCP
101
Enter 1 to enable.
Enter 0 to disable.
Enter 0 to disable.
Enter the option, followed by
the pound (#) key.
Check IP
address
110 None
Set IP Address
111
Enter value using the
numbers on the
telephone keypad. Use
the star (*) key when
the star (*) key when
entering a decimal point.
Enter the value, followed by
the pound (#) key. DHCP
must be “Disabled,”
otherwise you will hear the
otherwise you will hear the
announcement, “Invalid
Option” if you try to set this
value.
Check Net Mask
120 None
Set Net Mask
121
Enter value using the
numbers on the
telephone keypad. Use
the star (*) key when
the star (*) key when
entering a decimal point.
Enter the value, followed by
the pound (#) key. DHCP
must be “Disabled,”
otherwise you will hear the
otherwise you will hear the
announcement, “Invalid
Option” if you try to set this
value.
value.
Check Gateway
130 None
Set Gateway
131
Enter the value using the
numbers on the
telephone keypad. Use
the star (*) key when
the star (*) key when
entering a decimal point.
Enter the value, followed by
the pound (#) key. DHCP
must be “Disabled,”
otherwise you will hear the
otherwise you will hear the
announcement, “Invalid
Option” if you try to set this
value.
value.
Check MAC
Address
Address
140
None
You will hear the phone
adapter’s MAC address.
adapter’s MAC address.
Check Firmware
Version
Version
150
None
You will hear the phone
adapter’s firmware version.
adapter’s firmware version.
Manual Reboot
7326668 None
After you hear, “Option
successful,” hang up the
phone. The phone adapter
phone. The phone adapter
will automatically reboot.
PAP2 Menu Options