LevelOne WBR-3460 Manuale Utente

There are two modes available on the Mode screen. 
•  Router - Both the ADSL Modem and the Router features are operational. In this 

mode, this device can provide shared Internet Access to all your LAN users. Also, 
by default, it acts a DHCP Server, providing an IP address and related information 
to all Wireless and LAN users.  

•  Modem - Only the ADSL Modem component is operational. All Router features 

are disabled. This device is "transparent" - it does not perform any operations or 
make any changes to the network traffic passing through it. You need to have a 
DHCP Server on your LAN to provide IP addresses to the Wireless clients using 
this Access Point.  

This Chapter describes operation while in Modem Mode, also called Bridge Mode. 

When this device restarts in Modem mode, the IP address does not change, but the 
DHCP server is disabled. However, your PC will usually retain the IP address pro-
vided by the DHCP Server, so the connection will be automatically re-established. You 
then need to ensure that the IP address of this modem is suitable for your LAN.  
•  You need to have a DHCP Server on your LAN to provide IP addresses to the 

Wireless clients using this Access Point. 

•  This Modem/AP must be a valid device on your LAN, to allow management con-

nections. You must assign a (fixed) IP address which is within the address range 
used on your LAN, but not within the address range used by your DHCP server. 

When you connect in future, just connect normally, using the IP address you assigned. 

1.  Start your WEB browser. 

2. In 

the 

Address box, enter "HTTP://" and the current IP Address of the Wireless 

ADSL Modem, as in this example, which uses the Wireless ADSL Modem's de-
fault IP Address: 

HTTP://192.168.0.1 

3.  When prompted for the User name and Password, enter admin for the user name, 

and the current password, as set on the password screen. (The password is the 
same regardless of the mode.)