LevelOne WBR-3460 Manuale Utente
Wireless ADSL2/2+ Modem Router User Guide
120
Encryption
The same encryption method must be used. The most
common encryption method is TKIP. Another widely-
supported method is AES.
common encryption method is TKIP. Another widely-
supported method is AES.
Wireless LAN Configuration
To allow Wireless Stations to use the Access Point, the Wireless Stations and the
Access Point must use the same settings, as follows:
Access Point must use the same settings, as follows:
Mode
On client Wireless Stations, the mode must be set to "Infrastruc-
ture".
(The Access Point is always in "Infrastructure" mode.)
ture".
(The Access Point is always in "Infrastructure" mode.)
SSID (ESSID)
Wireless Stations should use the same SSID (ESSID) as the
Access Point they wish to connect to. Alternatively, the SSID
can be set to "any" or null (blank) to allow connection to any
Access Point.
Access Point they wish to connect to. Alternatively, the SSID
can be set to "any" or null (blank) to allow connection to any
Access Point.
Wireless
Security
Security
The Wireless Stations and the Access Point must use the same
settings for Wireless security. (None, WEP, WPA-PSK).
settings for Wireless security. (None, WEP, WPA-PSK).
WEP: If WEP is used, the Key size (64Bit, 128Bit), Key value,
and Authentication settings must be the same on the Wireless
Stations and the Access Point.
and Authentication settings must be the same on the Wireless
Stations and the Access Point.
WPA-PSK: If WPA-PSK is used, all Wireless Stations must be
set to use WPA-PSK, and have the same Pre-shared Key and
encryption system.
set to use WPA-PSK, and have the same Pre-shared Key and
encryption system.
For Ad-hoc networks (no Access Point), all Wireless stations
must use the same security settings.
must use the same security settings.