Laney Amplification Music Mixer CD640 Manuale Utente
MONITOR EQ: 7 band graphic equalizer, for the ‘Monitor/Main’ section of
the amplifier. This also acts as EQ for the line level ‘Monitor’ output socket.
the amplifier. This also acts as EQ for the line level ‘Monitor’ output socket.
FX RETURN: Controls the overall effects level of the on board DSP present in
the monitor signal.
the monitor signal.
MAIN EQ: 7 band graphic equalizer, for the ‘Main’ section of the amplifier.
This also acts as EQ for the line level ‘Main’ output socket.
This also acts as EQ for the line level ‘Main’ output socket.
FX RETURN: Controls the overall effects level of the on board DSP present in
the main signal.
the main signal.
AUX IN: Determines the overall level of signal connected to the AUX IN jack.
When used with an external effects device this control sets to overall level of
the effects device in the master mix.
When used with an external effects device this control sets to overall level of
the effects device in the master mix.
TAPE IN: Determines the level of an external device connected to the TAPE
IN jacks.
IN jacks.
AUX IN: Jack socket line in, designed to work in conjunction with the ‘Effect
Out’ socket, as the return of an effects loop.
Out’ socket, as the return of an effects loop.
TAPE IN: Dual phono, line level input sockets, ideal for connecting an
external tape machine, CD player, etc. to the amplifier.
external tape machine, CD player, etc. to the amplifier.
REC OUT: Dual phono, line level output sockets, ideal for connecting an
external recording device.
external recording device.
MAIN OUT: Provides a line level signal for connecting to external power amp
sources. Signal level is determined by the MAIN MASTER VOLUME.
sources. Signal level is determined by the MAIN MASTER VOLUME.
MONITOR OUT: Line level signal provided for connecting to an external
powered monitor or connecting to an external power amplier supplying un-
powered monitors. The Level of signal present at this socket is determined
by the individual MONITOR level of each channel. With the AMP MODE
SELECTOR set to MAIN/MONITOR the MONITOR OUTPUT SOCKET on
the rear of the amplifier should be used for connecting to unpowered
monitors. A line level signal is always present at this front panel MONITOR
OUT socket.
powered monitor or connecting to an external power amplier supplying un-
powered monitors. The Level of signal present at this socket is determined
by the individual MONITOR level of each channel. With the AMP MODE
SELECTOR set to MAIN/MONITOR the MONITOR OUTPUT SOCKET on
the rear of the amplifier should be used for connecting to unpowered
monitors. A line level signal is always present at this front panel MONITOR
OUT socket.
MASTER VOLUME: Sets the overall listening level of the powered mixer.
20
18
21
22
23
25
19
24
26
27
28
29
Concept
7
CD640 CD850S Manual