Brother DECT BCL-D70 Manuale Utente
General Information
3
1
d
Charge the battery by leaving the
cordless handset in the cradle for at
least 12 hours before you use it.
(See Charging the battery on page 25.)
You can continue to set up the handset
during this time.
cordless handset in the cradle for at
least 12 hours before you use it.
(See Charging the battery on page 25.)
You can continue to set up the handset
during this time.
Setting your country
1
The first time you install the battery, you must
set your country so that the cordless handset
works correctly on local telecommunication
lines.
set your country so that the cordless handset
works correctly on local telecommunication
lines.
a
Press Menu/OK.
b
Press a or b to choose your country.
Press Menu/OK.
Press Menu/OK.
c
Press 1 to confirm.
Note
(For Asia)
If you do not find your country, choose
Others
Others
in step b.
Registering cordless
handsets
handsets
1
You can register up to 3 additional cordless
handsets for a total of 4 cordless handsets to
the machine (base unit).
handsets for a total of 4 cordless handsets to
the machine (base unit).
a
Press MENU on the touchscreen of the
machine (base unit).
machine (base unit).
b
Press a or b to display Initial
Setup
Setup
.
c
Press Initial Setup.
d
Press a or b to display Register
Handset
Handset
.
e
Press Register Handset.
f
Press Register.
The machine (base unit) searches for
the cordless handset.
The machine (base unit) searches for
the cordless handset.
g
Press Menu/OK on the cordless
handset.
handset.
h
Press a or b to choose Register HS.
Press Menu/OK.
Press Menu/OK.
i
Press a or b to choose Base1, Base2,
Base3
Base3
or Base4.
Press Menu/OK.
Note
• If you have already registered the handset
to a base unit, make sure you choose a
base unit number that is not being used.
For example, if you register the handset to
an additional base unit and you choose
Base1
base unit number that is not being used.
For example, if you register the handset to
an additional base unit and you choose
Base1
, the base unit previously stored in
Base1
will be overwritten and the handset
will no longer be connected to it.
• Your machine (base unit) is already stored
as Base1 on the included handset.