Avanti MOM9705 Manuale Istruttivo
2
2) Installation of the lower side of the Metal bracket to the Refrigerator:
Lay and center the Metal bracket on top of the refrigerator.
Using the four (4) existing holes on the bracket as a guide, mark the locations where to drill the holes (C),
(D), (E) and (F). See illustration # 2.
Illustration # 2
3) Drilling the four holes to the Refrigerator:
After marking the locations of the four (4) holes, remove the bracket from the top of the refrigerator and
proceed drilling the four (4) holes with a ¼” drill bit into the rear portion of the top of the Refrigerator. See
illustration # 2.
4) Inserting the Plastic Anchors to the Refrigerator:
Insert the four (4) Plastic Anchors provided into the four (4) holes (step 3) in the rear portion of the top of the
refrigerator. See illustration # 2
5) Affixing the Metal bracket to the refrigerator
Align the four (4) holes of the lower part of the metal bracket to meet the four (4) plastic anchors
installed in previous step 4.
Attach the lower part of the metal bracket to the refrigerator.
Secure with the four (4) Phillips Pan Head Sheet Metal screws (provided) using a Phillips head
screwdriver. See illustration #3.
Illustration # 3