Maytag MGS8880DS Utilizzo E Cura

1. Press BROIL.

2. Select the broiling temperature by pressing 1 - High or 2 - Low.

3. Press START and allow the oven to preheat for 5 minutes.
4. To change the temperature, repeat steps 2 and 3.
5. Position the cookware in the oven, and then close the door.
6. Press CANCEL when finished.

1. Press CONVECT until the desired convection mode appears in the display. 
2. Press START.
3. Press the number keypads to set the desired temperature.

4. Press START.

5. To change the temperature, repeat steps 3 and 4.
6. Press CANCEL when finished.

Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.

2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the number 

keypads. The default temperature is 170°F (75°C).

3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.

The Delay Start keypad is used to enter the starting time for an oven function with a delayed 
start. Delay Start should not be used for foods such as breads and cakes because they may not 
bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.

Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set length 
of time, and/or shut off automatically. 
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.

Provides the fastest preheat time for the Bake function. Power Preheat is preset 

to

 Off, but it can 

be changed to On.

1. Press POWER PREHEAT.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be 
removed prior to Power Preheat. A standard rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Power Preheat may be started directly by 
pressing POWER PREHEAT.

1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for the 

Medium setting or a third time for the High setting.

3. Press START to begin preheating the warming drawer. 
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating element.
See the “Warming Drawer” section for more information.

See the “Clean Cycle” section.

 

 

1. Check that the oven is off. 
2. Press and hold START (hold 3 sec to lock) for 3 seconds.
3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked. The cooktop functions 

are not affected by the oven control lockout.

Press and hold SETTINGS/CLOCK for 3 seconds to change status. The display will scroll 
“Energy saver on.” or “Energy saver off.”
If Energy Save is on, the range will go into sleep mode after 5 minutes of inactivity. Any keypad 
press will activate the display. If Energy Save is off, the display will be on at all times.