Dacor ER30DSCHNG Utilizzo E Cura
7
Cooktop Assembly
WARNING
To avoid the chance of fire, explosion or carbon monoxide
poisoning, do not attempt to use your range without the burners
completely and properly assembled. The burner rings spread
the flame evenly around the burner cap. The burner rings must
be properly seated for proper burner lighting and operation.
Stack Burner Assembly
1. Put the burner rings on the burner bases as shown
below. Match the correct sizes. The bottom of the cor-
rect size burner ring fits inside the top of the matching
burner base.
2. Turn the ring until it drops into place. Twist each ring
back and forth slightly to make sure it is properly
seated.
3. Put the burner caps on top of the burner rings. The
ridge around the bottom edge of the cap goes around
the top of the burner ring.
Crown Burner Assembly
1. Put the burner head in place as shown below. The
locating tab on the burner head goes in the keyed
hole as shown.
2. Put the burner ring on the burner head as shown.
Match the tabs on the bottom of the ring to the slots
on the burner head. Twist each ring back and forth
slightly to make sure it is properly seated.
3. Put the burner cap on top of the burner ring. The
ridge around the bottom edge of the cap goes around
the top of the burner ring.
Setting Up Your Range
Burner Locations
Ridge on bottom of
burner cap
Step
Step
Step
Stack burners
Crown burners
Burner base
Burner ring
Slots
Keyed hole
Ridge on bottom of
burner cap
Step
Step
Step
Tabs
Burner base
Put locating tab
into keyed hole
Burner ring
Burner head