GE GEH50DFEJSR Foglio Delle Specifiche

GEH50DFEJSR 

GeoSpring

™

 hybrid electric water heater

For answers to your Monogram,

® 

GE Profile

™

  

or GE

®

 appliance questions, visit our website  

at geappliances.com or call GE Answer Center

®

  

service, 800.626.2000.

Local Installation Regulations: This water heater must be installed in 
accordance with these instructions, local codes, utility codes, utility 
company requirements or, in the absence of local codes, the latest edition  
of the National Electrical Code. It is available from some local libraries or  
can be purchased from the National Fire Prevention Association,  
Batterymarch park, Quincy, MA 02169 as booklet ANSI/NFPA 70.

Installation Information: For complete information, see installation 
instructions packed with your water heater.

Power Requirements: Check the markings on the rating plate of the water 
heater to be certain the power supply corresponds to the water heater 
requirements.

Location: Locate the water heater in a clean dry area as near as practical to 
the area of greatest heated water demand. Long uninsulated hot water lines 
can waste energy and water.

Note: Because this unit draws in air from the room to heat the water, the 
room must be at least 10’ x 10’ x 7’ (700 cubic feet) or larger. If the room is 
smaller, there must be a louvered door. Louvers should be 240 square inches 
(0.15m2) or greater. If two louvers are used, one should be near the top of 
the door. Place the water heater in such a manner that the air filter, cover 
and front panels can be removed to permit inspection and servicing, such 
as removal of elements or cleaning of the filter. The water heater and water 
lines should be protected from freezing temperatures and high-corrosive 
atmospheres. Do not install the water heater in outdoor, unprotected areas.

Above illustration intended for dimensional reference only.
Refer to photograph for actual product appearance.