Marvel MP24WDG4RS Manuale Proprietario

13

Figure 10a

With the door laying on a flat surface and starting at a 

corner of the door remove the magnetic door gasket from 

the interior side of the door, see Figure 10. Set the gasket 

aside on a flat surface.

There are 10 holes in the gasket retainer extrusions, (3 on 

each side and 2 at the top and bottom which are used to 

fasten the panel to the front of the door. The screws are 

provided in the literature pack.

Figure 10

Overlay panel 

flush with top 

of door.

Holes in 

gasket 

retainer.

Magnetic Gasket 

remove starting at a 

corner, grasp and pull 

away from the door.

Depending on your model cut the overlay door panel to the 

dimensions shown in Figures 11 to 18. 

Overlay panel to 

be centered on 

width of door.

Figure 9

Press and hold down this 

tab on the wire connector 

and pull the connector apart.