OceanAire PAC6012 Guida Dello Sviluppatore
6
CONDENSATE RESERVOIR TANK
For Air Boss Models PAC12, PAC18, PAC24 and PAC36, a 5-gallon polyethylene tank is
provided standard, to collect condensate. The tank is located in the lower, front section
of the unit. A high water level cut-out switch is used to stop the compressor and
condenser fan automatically when the tank's pre-set water level has been reached. The
evaporator fan will continue to run, circulating air.
provided standard, to collect condensate. The tank is located in the lower, front section
of the unit. A high water level cut-out switch is used to stop the compressor and
condenser fan automatically when the tank's pre-set water level has been reached. The
evaporator fan will continue to run, circulating air.
TANK LEVEL ADJUSTMENT INSTRUCTIONS
An adjustment screw is provided to vary the cut-off of the tank full switch. If a lighter (less
weight) level of water is desired, turn the adjusting screw clockwise. Do not exceed 6 full
turns counter-clockwise.
weight) level of water is desired, turn the adjusting screw clockwise. Do not exceed 6 full
turns counter-clockwise.
CAUTION, TURN UNIT OFF: BEFORE ADJUSTING SET SCREW
BEFORE
BEFORE
REMOVING
TANK
TO
EMPTY
CONDENSATE
Turn screw clockwise to lower water level. Less water makes tank lighter and easier to
remove.
remove.
NOTE: Max. and Min. water levels shown are those at which the unit will shutdown and
not restart until the condensate tank has been drained.
not restart until the condensate tank has been drained.
Condensate Tank
*Tank Water Level
Adjusting Screw
Spring
Handle
For PAC36 —
Condensate
drains
through a
corrugated
hose into
tank cap
Condensate
drains
through a
corrugated
hose into
tank cap
High Water Level
Cut-Out Switch
Condensate
Tank Tray
Cut-Out Switch
Condensate
Tank Tray
Max Water
Level
4" From Top
Level
4" From Top
For PAC12, PAC18
and PAC24 —
Condensate water
drops from drain pan
into trough on tank
and PAC24 —
Condensate water
drops from drain pan
into trough on tank