Marvel M24DZBGPR Istruzione Sull'Installazione

18

Use two or more people to move product.

Failure to do so can result in back or other injury.

Support 

door before 

removing 

hinge-

Support the door at the floor.

1.  Loosen the set screw in the bullit cap with a 

3

⁄

32

" hex 

key and remove the bullit cap from the hinge pin by 

sliding off. Do this to both the top hinge and at the bot-

tom hinge. Set aside parts for later reassembly.

2.  Loosen 

5

⁄

16

" Hex Nut underneath the hinge with a 

1

⁄

2

" 

open end wrench, unscrew completely from the hinge 

pin.

3.  Make sure the door is supported, and remove the hinge 

pin from the cabinet hinge with a flat blade screwdriver.

4.  Carefully lift the door off the lower hinge.

5.  Assemble parts in reverse order.

Bullit cap-

-Set screw

-

5

⁄

16

 Hex 

nut

Top hinge 

pin-

Door

hinge-

-Cabinet

hinge

Figure 20

Figure 21

Door panels MUST NOT exceed 50 lbs. Do NOT use glass, 

mirrors, granite or similar heavy materials for panels. Pan-

els weighing more than 50 lbs. may cause product damage.  

We recommend that the door load (panel and food) NOT 

exceed 90 lbs.

1.  A #10 pan head wood screw should be used to prop-

erly secure the overlay panel (See Figure 24). Screws 

are supplied with unit.

2.  Use only pan head screws.

3.  If your overlay panel is thinner than 

5

⁄

8

" (15.9 mm) 

you will need to purchase shorter screws. The longer 

screws will break through the front of the panel.

-Bullit cap

Set screw-

-Door

hinge

-Cabinet

hinge

Figure 22