Smeg A1PXU Manuale Utente

6

-  FLAMMABLE MATERIALS SHOULD NEVER BE STORED IN THE OVEN OR NEAR THE

SURFACE BURNERS.

-  GREASE IS FLAMMABLE: Allow hot grease to cool before attempting to handle it. Do not allow

deposits of grease to accumulate.

-  DO NOT USE WATER ON GREASE FIRES: Turn the appliance off and smother the fire with baking

soda or use a dry chemical or a foam-type extinguisher.

-  USE ONLY DRY POTHOLDERS: Moist or damp potholders on hot surfaces may cause burns from

steam. Do not allow potholders to touch hot surface burners. Do not use towels or other bulky cloth in

place of potholders.

-  Never allow garments, potholders or other flammable materials to come into direct or indirect contact

with burners until they have completely cooled.

-  DO NOT TOUCH SURFACE BURNERS OR THE INSIDE OF THE APPLIANCE: Heating elements

may be hot even though they are dark in color. The oven cavity can be hot enough to cause burns.

During and after use, do not touch areas near burners or the inside of the oven until they have had

sufficient time to cool. Do not allow garments or any flammable material to come into contact with hot

surfaces. If personal clothing or hair catches on fire, drop and roll immediately to extinguish the

flames.

-  PLACE THE OVEN RACKS IN THE DESIRED POSITION WHILE THE OVEN IS COOL: If a rack

must be removed while the oven is hot, do not allow the potholders to come in contact with the broiler

burner.

-  USE CAUTION WHEN OPENING THE OVEN DOOR: Allow hot air or steam to escape before

removing or placing foods in the oven.

-  Do not leave the packing materials around the home. Sort the various items of waste and take them

to the nearest specialized waste collection facility.

-  Do not obstruct oven vents or openings for air intake.

-  ELECTRICAL GROUNDING IS REQUIRED. It is the customer’s responsibility:

a) To contact a qualified electrician.

b) To ensure that the electrical system is adequate and in compliance with the National Electrical

Code ANSI / NFPA 70 Electrical Code – latest edition – Or the CANADIAN ELECTRICAL CODE,

C22.11 – 1982 and C22.2 No. 01982 – or latest edition – and all local codes and ordinances.

-  Always check that the controls are in the "zero" (off) position when the range is not in use.

-  Use only pots or pans with a perfectly smooth, flat bottom on the range surface burners. NEVER

USE THE RANGETOP AS A WORK SURFACE.