Marvel 8SWCEBBGL Istruzione Sull'Installazione

Figure 13

With the #10 wood screws provided fasten the overlay panel to 

the door. (See Figure 14).

Attach the lock cam to the back of the lock assembly with the 

phillips head machine screw provided. Orient the lock cam verti-

cally when installing on the lock.

Press the door gasket into the door channel. Make certain the 

gasket corners are fully inserted. If applicable insert the key into 

the lock and make certain the lock operates properly.

Install the top and bottom hinge adapter bushings back into the 

hinge adapters that were removed in step 6.  Install the door by 

reversing the procedure from step 2. Install the top hinge pin so 

the screw head is flush with the top surface of the hinge. If appli-

cable insert key into lock and verify the lock cam works properly 

with the catch bracket on the front of the refrigerator cabinet. 

Clearance hole through

door gasket channel

#10 Wood Screw

Figure 14

Back of door

Top hinge pin

Top door hinge 

adapter

Top hinge adapter 

bushing

Top hinge

Bottom door 

hinge adapter

Bottom hinge 

adapter bushing

Bottom hinge pin

Bottom hinge

 cam

Figure 15

Right hand 

hinges shown

21

Bottom

hinge

1.234” (31.3mm)
  .991” (25.2mm)