Monogram ZIFS360NXRH Foglio Delle Specifiche

Pagina di 3
For answers to your Monogram,
® 
GE Profile
 
or GE
®
 appliance questions, visit our website 
at ge.com or call GE Answer Center
®
 service,  
800.626.2000.
110152
Specification Created 6/08
Listed by 
Underwriters 
Laboratories
ZIFS360NX
GE Monogram
® 
36" Built-In Integrated All-Freezer
Dimensions and Installation Information 
ZIFS360NXRH, Freezer 
Handle on the left side, the door swings left to right.
ZIFS360NXLH, Freezer 
Handle on the right side, the door swings right to left.
Caution
*Shipping height. The freezer can be adjusted to fit into 
a cutout 83-1/2" min. to 84-1/2" max. height. Note: the 
top case trim at the front is 1/2" higher and will overlap 
upper cabinetry or soffit. Use leveling legs and wheels for a 
maximum 1" height adjustment.
The water and electrical supply must be located as shown. 
The finished cutout width must be 35-1/2".  
Note: The case trim overlaps cabinets at the top and 
sides. Frameless cabinets may require filler strips to 
prevent interference with cabinet door swing. The opening 
width must allow for filler strips.
36" Frame to 
Frame Width
*84" From
Floor to
Top Frame
35"
Case Width
*83-1/2" 
at
Rear
25-3/4" Stainless Steel Models
Case Depth
Depth Including Handles:
27-3/4" Stainless Steel Models
28-11/16" Professional Models
Product Clearances 
These units are equipped with a 2-position door stop. The fac-
tory set 130˚ door swing can be adjusted to 90˚ if clearance 
to adjacent cabinets or walls is restricted. Order WX14X99 
door stop for precise settings between 90˚and 130˚.
251Dia59
 25" 
Minimum 
to Wall
130ϒ Door Swing
36-3/4"
23-7/8" 
Behind Frame
251Dia60
4" Min.
to Wall
90ϒ Door Swing
Corner Installation 
Allow 25" minimum clearance for a full 130˚ door swing. 
Allow 15" for pan removal. for a 90˚ door swing, allow 4" 
minimum clearance for professional models. If the 90˚ 
doorstop position is used, pan access is maintained but 
pan removal is restricted.
These units are top-heavy and must be secured to prevent the 
possibility of tipping forward. Anti-Tip protection is required.