Faber MAES30SS Istruzione Sull'Installazione

Version 05/11- Page 4

• Saber Saw or Jig Saw

• Drill

• 1  1/4" Wood Drill Bit

• Pliers

• Phillips Screwdriver

• Flat Blade Screwdriver

• Wire Stripper or Utility Knife

• Metal Snips

• Measuring Tape or Ruler

• Level

• Pencil

• Caulking Gun

• Duct Tape

• 1 Hardware Package

• 1 Literature Package

• 2 Conduit Connectors

• Power Supply Cable

• 1 Wall or Roof Cap

• All Metal Ductwork

9 Feet Straight Duct

2 - 90˚ Elbows

Wall Cap

Total System

9.0 feet

10.0 feet

0.0 feet

19.0 feet

3.0 feet

5.0 feet

12.0 feet

0.0 feet

45˚ Elbow

90˚ Elbow

90˚ Flat Elbow

Wall Cap

The ductrun should not exceed 35 equivalent feet 

if ducted with the required minimum of 6" round 

ductwork (TWO - 6" ROUND DUCTS FOR 48" 

MODEL).  Calculate the length of the ductwork 

by adding the equivalent feet in FIGURE 1 for 

each piece of duct in the system  An example 

is given in FIGURE 2.

Because  of the weight  and size of the 

rangehood canopy, two or more people 

are needed to move and safely install the 

rangehood canopy.

Failure to properly lift rangehood could 

result in damage to the product or personal 

injury.

PERSONAL INJURY HAZARD

WARNING!  BEFORE MAKING ANY CUTS OR HOLES FOR INSTALLATION, 

DETERMINE WHICH VENTING METHOD WILL BE USED AND CAREFULLY 

CALCULATE ALL MEASUREMENTS.

To reduce risk of fire and to properly exhaust 

air, be sure to duct the air outside – Do not vent 

exhaust air into spaces within walls or ceilings 

or into attics, crawl spaces, or garages.

Remove parts from packages. Check that all parts are included.

• 2 metal grease filters for 30" (76.2 cm) models

• 3 metal grease filters for 36" (91.4 cm) models

• 3 metal grease filters for 42" (106.7 cm) models

• 4 metal grease filters for 48" (121.9 cm) models

• 2 mounting brackets with adjustment screws installed

• 2 mounting bracket screws

• 4 washer head Phillips mounting screws

• Damper

• 2 dampers for 48" (121.9 cm) model.