Vinotemp VTICEMAKER15 Manuale Proprietario

IMPORTANT: Although the unit has been tested and cleaned at the factory, due to long-term 
transit and storage, the first batch of cubes must be discarded. 

 

•  ON/OFF button 

Pressing the ON/OFF button alternates between turning the ice maker on and off.  

•  MODE button 

Pressing the MODE button alternates modes between Freeze and Harvest, reflected by the 
status of the Green and Yellow LEDs.  

•  CLEAN button 

This button is used in triggering the wash cycle and setting ice size.  

•  Bin Full LED Indicator Light (Red) 

This light comes on to signify that the ice storage bin is full or that something is possibly 
blocking the ice-full probe. The unit will stop working. When ice cubes are removed from the 
bin and the ice-full probe is freed, the red light will flash for 3 minutes and then the unit will 
restart and return to Freeze mode.  

•  Ice LED Indicator Light (Green) 

This light comes on to signify that the unit is in Freeze mode. This is controlled by a 
temperature probe on the evaporator. When it flashes, the unit is working in the ice making 
mode controlled by a fixed timer.   

•  Harvest LED Indicator Light (Yellow) 

This light comes on to signify that the unit is in Harvest mode, controlled by the ice-full probe.  
NOTE: When both the Green and Yellow Indicator Lights are lit, the unit is in cold 
preservation mode. 
 

To adjust ice cube size, press and hold the “Clean” and “Mode” buttons together at the same time 
for at least 3 seconds. The unit will then enter Ice Size Adjustment mode and the yellow LED will 
blink continuously in this mode. Use the “Clean” or the “Mode” buttons to then select a desired ice 
cube size.  

 

1 7 6 2 1   S o u t h   S u s a n a   R o a d ,   R a n c h o   D o m i n g u e z ,   C a l i f o r n i a   9 0 2 2 1  

i n f o @ v i n o t e m p . c o m  

 

9